Receive snmp traps windows 7

Type whatever text you want to use for the community name in the community name field and then click on Add to list.

The system will need to know where to send the trap, i. Authentication is the process of verifying that a host name or address is valid. When the SNMP agent receives a request that does not contain a known community name or that is not sent from a member of the acceptable hosts list, the SNMP agent sends an authentication trap message to one or more trap destinations, indicating the failure of authentication.

A community name acts as a password that is shared by one or more SNMP hosts. Accepted community names are used to authenticate incoming messages only. You can add multiple community names. Important This version of Orchestrator has reached the end of support, we recommend you to upgrade to Orchestrator In this article.

If you select the No dependency option, type the communication port number that will be monitored for SNMP traps. Select to specify the generic identifier of the SNMP trap. There are six options available: coldStart 0 : Select to filter for a cold start of the network device.

This option has a numerical value of 0. This option has a numerical value of 1. Ask a Question. Jump to solution. Hope this helps someone else.

Tags 3. Tags: snmp. Jump to solution Solution. All forum topics Previous Topic Next Topic. This trap will have 4 variables. If you see a broken image, please right-click and select 'Open image in a new tab'.

We apologize for this inconvenience.